pregleda

DC-DC step-up konvertor 250W


Cena:
1.245 din
Stanje: Nekorišćen
Garancija: Ne
Isporuka: BEX
Plaćanje: Pouzećem
Grad: Beograd-Zemun,
Beograd-Zemun
Prodavac

electronic.center (1275)

97,76% pozitivnih ocena

Pozitivne: 2104

  Pošalji poruku

Svi predmeti člana


Kupindo zaštita

Proizvedeno u : Aziji

- 250W DC-DC Boost Converter Adjustable DC8.5V-48V To 10-50V 10A,

- The module uses imported power management chip design, high reliability, small inrush current, small size (length 70MM * width 36MM * high 13MM) efficiency up to 96%, maximum power 250W. The aluminum plate design is easy to install, and the back of the plate can be directly affixed to the metal shell to dissipate heat. Reduce equipment space,

- Module Properties: Non-Isolated Boost Module,

- Input voltage: DC 8.5V-48V,

- Input current: 10A (MAX) exceeds 8A or module temperature exceeds 60 degrees,

- Static operating current: 10mA (12V 20V, higher output voltage quiescent current will increase),

- Output voltage: 10-50V continuously adjustable (default delivery) Boost module, suitable for applications where the input voltage is less than the output voltage cannot be reduced,

- Output current: 10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current),

- Constant current range: 0.2-8A,

- Output power = input voltage * 10A, such as: input 12V * 5A = 60W, input 24V * 5A = 120W, input 36V * 5A = 180W, input 48V * 5A = 240W,

- Potentiometer: CC is constant current regulation; CV is constant voltage regulation,

- Operating temperature: -40 ~ +85 degrees (enhance the heat when the ambient temperature is too high),

- Operating frequency: 150KHz,

- Conversion efficiency: up to 96% (efficiencies related to input, output voltage, current, differential pressure),

- Over-current protection: yes (input exceeds 13A, the output voltage is automatically reduced, there is a certain range of error.),

- Input reverse polarity protection: Yes, (less than 5A if needed more in the reverse current, please input the string into the diode),

- Installation method: 4 3mm screw holes,

- Wiring: Wiring output, VIN+ is input positive, VIN- is input negative, OUT+ is output positive, OUT- is output negative,

- Module size: length 70mm width 36mm height 13mm,

- Module single weight: about 50 g.

- Svi uređaji su nekorišćeni i testirani su pre slanja; dajemo radnu garanciju da stižu u funkcionalnom stanju.
- Rok za reklamacije je 7 dana od dana preuzimanja robe.
- Sva komunikacija sa kupcima obavlja se isključivo putem Kupindo/Limundo poruka, izuzev u situacijama kada je neophodan i telefonski kontakt.
- Isporuka robe vrši se:
* Kurirskom službom POST EXPRESS- pouzećem. Vrednost robe i troškove poštarine (oko 190 dinara) i transfera novca (oko 50 dinara) plaćate kuriru po preuzimanju pošiljke,
* Kurirskom službom POST EXPRESS, uz avansnu uplatu vrednosti robe na tekući račun. U ovom slučaju, potrebno je izvršiti avansnu uplatu vrednosti robe i troškova poštarine (150 dinara) na tekući račun,
* POŠTOM, kao preporučena pošiljka. U ovom slučaju, potrebno je izvršiti avansnu uplatu vrednosti robe i troškova poštarine (80 dinara) na tekući račun,
* Broj tekućeg računa na koji možete izvršiti uplatu je:160-5100100460990-94.
- Nakon izvršene kupovine neophodno je da kupac izvrši potvrdu kupovine i svojih podataka putem poruke u roku predviđenom Kupindo/Limundo pravilnikom. Ukoliko u propisanom roku ne dobijemo potvrdu, smatra se da je kupac odustao od kupovine,
- Svi predmeti se šalju najkasnije 24 časa nakon dobijene potvrde, osim u izuzetnim situacijama,
- Lično preuzimanje robe NIJE MOGUĆE.
- Stalni kupci ostvaruju pravo na popuste pri kupovini.

Predmet: 78283209
- 250W DC-DC Boost Converter Adjustable DC8.5V-48V To 10-50V 10A,

- The module uses imported power management chip design, high reliability, small inrush current, small size (length 70MM * width 36MM * high 13MM) efficiency up to 96%, maximum power 250W. The aluminum plate design is easy to install, and the back of the plate can be directly affixed to the metal shell to dissipate heat. Reduce equipment space,

- Module Properties: Non-Isolated Boost Module,

- Input voltage: DC 8.5V-48V,

- Input current: 10A (MAX) exceeds 8A or module temperature exceeds 60 degrees,

- Static operating current: 10mA (12V 20V, higher output voltage quiescent current will increase),

- Output voltage: 10-50V continuously adjustable (default delivery) Boost module, suitable for applications where the input voltage is less than the output voltage cannot be reduced,

- Output current: 10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current),

- Constant current range: 0.2-8A,

- Output power = input voltage * 10A, such as: input 12V * 5A = 60W, input 24V * 5A = 120W, input 36V * 5A = 180W, input 48V * 5A = 240W,

- Potentiometer: CC is constant current regulation; CV is constant voltage regulation,

- Operating temperature: -40 ~ +85 degrees (enhance the heat when the ambient temperature is too high),

- Operating frequency: 150KHz,

- Conversion efficiency: up to 96% (efficiencies related to input, output voltage, current, differential pressure),

- Over-current protection: yes (input exceeds 13A, the output voltage is automatically reduced, there is a certain range of error.),

- Input reverse polarity protection: Yes, (less than 5A if needed more in the reverse current, please input the string into the diode),

- Installation method: 4 3mm screw holes,

- Wiring: Wiring output, VIN+ is input positive, VIN- is input negative, OUT+ is output positive, OUT- is output negative,

- Module size: length 70mm width 36mm height 13mm,

- Module single weight: about 50 g.
78283209 DC-DC step-up konvertor 250W

LimundoGrad koristi kolačiće u statističke i marketinške svrhe. Nastavkom korišćenja sajta smatramo da ste pristali na upotrebu kolačića. Više informacija.